Friday, 20 October 2017

Main Drawing of Sculptor

After finishing out sculptors we were asked to create a drawing of the sculptor, nothing else added to it just a nice slick drawing. Im pleased with the outcome, the bottom oval shape could of been more curved at the corners like the top one which has just a nice rounded oval shape. I added dreamer shading to the part I saw suitable so in the corners at the bottom and the top of the spout. I rubbed in pencil to make it more shadowy and to just add another tonal to the shading. The texture was very emotion but quite sharp where I've pressed harder with the pencil overall I don't think there is anything else I would add to this drawing as I think its s suitable drawing for the task given. Bu tin the future I need to work on my shaping more especially where the object curves round.

Cut Outs

Instead of using a pencil or a fine liner which we have already used, we decided to change it up snd use a different kind of media which was a craft knife, using the knife to carve out shapes to create your art. Firstly we cerated different shapes on one sheet just trying out the craft knife, I was pleased with some of the shaped that were made but some could have been more visible. Next we chose a part of the setup and used the craft knife to draw with it, this isn't the best being honest seeing as the shaped are very hard to see and the actual object is very hard to see as well, I think the problem I faced while doing this was that I kept cutting out the shapes and then slowly on the edges of it would start to tear away so the whole thing would just come out. This was meant to be a guitar and a bit of the bag that was showing, maybe a different position would have been more suitable for this, maybe the iron which had more detail on. One thing I did like about this was the strings of the guitar, you want see them on the blog but in person they have a really spiked rough texture which I have made my just slowly scratching downwards on the paper.

Collaborative Abstract Pieces


These three pieces where a group collaboration when we were studying abstract, we went round in a circle adding different media to each of our work. We added paint, water coloured ink, tape, charcoal, white chalk, pencil, fine liner and I think there was a few more more these are the ones I can mainly see on these three. The purpose of this was to see everyones take on abstract and get ideas based on what we all have made seeing the things we liked about it and the way we done it. In the first picture I like the tape which has been folded over and over again giving the effect that its been overlapped with the tape. The faint fine liner is something I really like about it, the way everything is bold and then you just have that faint outline of the flowers. The texture of the first piece is very rough with tape being folded and the dry paint creating this dry feel to it. The second piece has Japanese writing on it which is very usual and odd but its something that really stands out when looking at it, nothing else really catches my eye that much, the white paint on the black paint is also a nice touch to it, it provides a smooth like texture with the white paint being smoothed down along the black paint. The final piece is very messy and clumped compared to the rest of the ones I've chosen, once again there is the overlapped tape which creates that rough texture, the chalk which has been draw everywhere along the page so we cant really make out what the image actually is instead of just drawing the outline of the image. At the top there has been water coloured ink and someone has added bleach to it so its faded the ink leaving this white dry effect placed onto the coloured ink.



Batik

Using Batik was very different, I didn't even know you could create art out of it so when being discussed on how to use it I was very surprised. Firstly we were told the safety precautions which was to watch out for a wire which was connected to the wax, we taped the wire down incase anyone tripped over it because then the wax would go everywhere and it could people someone. When using Batik we drawn the outline of our setup at the time and then back in for the detailed parts, some wax splattered on the page leaving small circles around the page, they were meant to be there but I think they give off a nice effect, they could of been removed but I preferred them to stay. Using Water coloured ink we painted all the colours around the page and the ink wouldn't effect the wax which cited as a barrier to what ever we had made with it, Overall I'm happy with this, I like all the bright colours and it stands out from the rest of my work.
This was still Batik but instead of melting wax we used the thick chalk stick which we used to draw with, it wasn't easy to draw with because to was very difficult to see what we were doing, a lot of the students were using their phone touches to shine light onto it to be Abe to see the outline of their shape, I myself didn't think it helped the much. You could only see the outline when you added the Coloured ink but still then it was very faint, out of the two I would rather use the hot wax, its more easy to draw with and more visible compared to the other type of wax. I could of mixed the coloured a bit more instead of doing each section a different colour, maybe going back and pressing over the sections where I missed to provide more of a shape to the object.

Mark Making

This image could of been more clearer but I gives you an overshot of when we studied mark making, we used a variety of different materials like a shell, pine cone, glue spread and stick and string, there were more which aren't that clear to see but the marks they made are, all of them are very similar to each other, being honest some of them were really difficult to make marks with like the pine cone for example it was hard due to it being wide at the bottom so you could hardly touch the paper with it. The easiest media we used was a glue spread, the end f it gave us a nice flat surface to slide the shapes we were making onto the sheet and you could use the edges to create shapes aswell. On the left is a image that I made using the glue spread mainly due to it being the most useful in my opinion seeing as it provided the most shapes. One thing that could of being altered was the background there is a very plain white background which stand out so that could of been covered with part of the setup the texture though it very smooth due to the end of the glue spread, it wasn't really rough in any areas.


Charcoal// Chalk drawings

While experimenting with charcoal we were asked to create a drawing based upon the still life set up that was in front of us at the time, this piece consists of a gas mask, the chair, a bottle, a bag/ cover which covered half of the setup and part of a guitar. The things we were drawing depend upon what direction we were facing. Using charcoal itself was very messy in my opinion every slight smudge on the paper would cover parts of the page with black chalk, its not something I would normally use or think about using in the suture because its to tricky to draw with as it gets really really messy and it can ruin whatever your drawing. Overall I'm pleased with this piece I was expecting it to be a lot more messy than it actually is, the part on the gas mask is my favourite part of this for some reason, the way I've smudged the chalk at the back gives this nice shadow like effect behind the mask. On thing I could of improved on was the jar at the top, its very flat and I could of made it more curved where it turns off at the end behind the mask and chair.

This time using charcoal we used sticky tape as well, wetting the side of them would also them to be stuck onto paper, we wanted to show the image being carried on past the tape and then being finished, using the tape wouldn't be something id recommend to anyone, it was even more messy than using the charcoal by itself, I felt as though I had to always remember on when to place the tape, I just wanted to focus on drawing it instead of remembering to us it. The main drawback with this was time mainly, if I was given more time I could of finished more of the gas mask were it just ends, some of the tape I put down, I sometimes forgot to carry on the drawing and on some of it there isn't an outline following through. But overall it was a different type of media and it was fun to try out new things and see what they were like.

Wednesday, 11 October 2017

Day at the Palm house in Sefton park

Following our next assignment we visited The Palm house in Sefton park, we were asked to capture the buildings architecture and make a few sketches on all the different things that were outside and inside, these are some of the pictures that I took, I have more but these were the ones that were my favourites for a particular reason. Ill talk about the ones that really stuck with me after our trip.


Out of the pictures it took I took a lot of the flowers that were inside of the Palm house but this one was my favourite from them all, the main reason its my favourite is because of the colour, the pinky/ red with the yellow stems at the top just creates this bright colourful flower which if you scrolled down it would be the first thing to catch you eye. The shape of the flower is another reason why I've chosen it, its not just circular like the other flowers, it has many curves and creases which adds to it being more and more unique to all the other flowers that were at the building. 

There was a statue of Peter Pan, I chose to take a picture of this because even though its not about the actual buildings architecture or the plants inside it really interested me seeing as I really wasn't expecting to see this statue here, its very unusual and its the first stage based upon Peter Pan I've seen. It's both interesting and unique to all the things that I found on our trip. The children at the bottom climbing up is strange in a way because It could have so many meanings, looking at it, they almost look like they're looking up at him like some sort of God, it would be interesting to find out more about that and see what the actual meaning is behind it.


Even though I took a lot of pictures of the plants/ bushes  that were In the building, this one was one of my favourites out of the ones I saw. The colours of the flowers and the way they hang down covering the door are one of the reasons why, you still get a hint of the architecture, the patterns on the building is something that what makes this place so special. The colour just give off this fresh airy impression and the light coming through the glass also adds to that feeling. 









Tuesday, 10 October 2017

Abstract Work

This is the main piece of when I studied abstract work, while studying this topic I was really enjoyed my self the fact we could use be free with our movement creating new shapes and textures was just a fun way of making art. This is something I prefer, id rather create something thats very messy but it has a meaning behind it but in this case theres was a meaning it was just us having a go at making abstract work and juts having fun and being free with it. In this piece the things I really liked about it was firstly the colours, the main colour in this is yellow which is one of my favourite colours its just a happy bright colour which helps reflect that emotion onto your work. The texture on the left hand side is very rough as I've overlapped the different types of media over and over again, the white background and then the yellow overlay really works in my opinion with the black splatters also added. The shapes was something I really liked about this piece, the spirals and lines/ smudges are just a nice touch to it and the little bits of light blue paint also makes it a lot more interesting in my opinion. there were a variety of different media used while creating this, the main one was paint, but I also used a fine liner  pencil, water coloured ink both black and blue and tape which was a nice add to it which just shows all the different types that I've used which just adds to how much the piece is that unusual and interesting.


Pencil and Fine liner Drawings

One of my first drawing as an A level art student was very speedy and unpolished with us coming back from the summer I was really rusty drawing again. The middle piece in class was of a variety of still objects, we had the chance to choose some of those objects and start drawing them. In these various drawings I've chosen the same object for example the iron, I liked the shaping of the iron and in every drawing I decided to change the angle so they weren't so similar. I used just a normal pencil for these drawings and the smudging is something that I enjoyed making while using it because it gives the picture a shadow effect around the edges.




Heres a close up of the picture on the right, even though it was a pencil drawing I would of liked to add a bit more colour to brighten the picture up. I also wold of liked to improve the shaping of the bottle on the right hand side making it more curved around the top, more shading would of been nice on this as well just too give more of a contrast between the image and the background. The thing I like of this drawing is the other bottle, the label is something I'm happy with as it looks as though its been curved round the bottle and the shading isn't bad compared to the other bottle with non at all.



This drawing could have turned out do much better but the main reason for it not turning out how I wanted it to was the time as it was a quick sketch, more shading was needed on this also because the image looks to bare, I happy with the shaping of the soon to be bag that was hanging over all the objects in our setup, again just a little more time and I could of improved this picture so much more but it still shows the difference between the other drawing with shading and without.



This drawing is my favourite, its made by using a fine liner and all the different shapes and lines used really gives off a nice textured pattern, it makes the drawing stand out more and it shows off how I've used all different shapes instead of drawing the same picture as shown above, the different type of media used also shows my range of development. The background is one of the reasons why I prefer it to the other I've done because the variety of shapes overlapped creates this sort of clumped and over flowing effect. The way I've just drawn half of the iron shows off the method of using a view finder and just picking one area of the setup.



Monday, 9 October 2017

Wired Sculptor Art

In this assignment we were looking at still life and organic forms, all of us were choosing our own theme to follow with this topic, I'm choosing to follow the wildlife/nature theme so i decided to create a nature based object using a bunch of materials that i will now mention. The main thing i used in this was wire, thin and thick wire, thin wire was more easy to bend and carve into place where as the thick wire was more hard to bend into place and tighten. The object i chose to create was a watering bucket, it links nicely into the theme i'm taking and it isn't just a random sculptor.

This picture is showing you inside the sculptor, so i'm showing you different angles of it, this is the start of the sculptor so you will see the development of it through the various pictures shown below. At first I was settled with the inside but then thinking about it, it was a bit boring so I added light and dark blue tissue paper to the inside of it which you can see in the picture below. I think this just makes the sculptor more creative and adds more colour than just green. The overlapped dark green paper added to the handle gives more of a texture to the sculptor along with the paper around the top of the sculptor.



In this picture you can see the added blue tissue paper which brightens up the inside. This part was quite difficult because I had to glue the outside and then overlap the tissue paper, some of it didn't stick down properly so I had to go back and repeatedly stick it down. Adding the water makes my sculptor more unique because if I just left it plain then it wouldn't really get recognised the amount of green tissue paper would just blend the whole sculptor making it invisible in a way, the blue just allows it to stand out more.
This picture shows the sculptor in full size so you can see every detail, after creating my outline with the different kinds of wires, I overlaid it with light green tissue paper for the outside and dark green tissue paper for the edges of the top and the handle just to add a bit more colour. What I thought could be improved was the spout, it was very plain snd bring so I added something which brightened it up which you can see below.So far at this point the texture was actually very smooth. But at the top at the edges it was very rough like with all the scrunched up paper adding that more rough jagged texture.




This is showing the final piece but its been covered with PVA glue to create more of a sturdy texture so its more easy to handle and move, The glue gives will eventually dry makingthe sculptor more crisp and strong. As you can see there are little water drops coming from the spout which were made by creating a long wire and then just wrapping the tissue paper around it, from the start to what it is now I'm very happy with the outcome its very original and different compared to everyone else in the class. But to make this sculptor better I could of made the outline more straight because the back is very slouchy so straightening that up would improve the shape of it.

My first fine art blog post....

Hello, welcome to my new fine art blog. I will be uploading and discussing my work for all my projects...                                                       



Assemblage Piece 4 // Book Of Life //

 egfojwerngierngrenhgetrhnkgrengerjigoh

Search This Blog