Saturday, 4 November 2017

Flat screen printing

These are the pictures from when we studied Flat screen printing, there were a few complicated steps to remember when actually creating our own. Before we started we had to create three 2D cutouts which would be our stencils so when pressing down whatever the stencil was that is what our prints would be, the three I made where two of a butterfly and one of a bunny. When cutting the 2d designs out some of them were a problem because there was to much detail and it would of all just fell apart so the ones I chose were rarely simple in the way they didn't have an overload of detail. After we had our 2D designs done we are all ready to start  we placed an A2 sheet down and then our flat screen which we had to check when choosing one because some of them were clogged and when pressing,the paint wouldn't of gone through. After choosing a clean flat screen I placed it own on the paper and marked the edges with pencil so if it moved I know were I started from. 




The next step was to place paint on one side of the silk screen, there was a bit of a problem with the choice of paint, some of them were really runny so if we put that down the print would have quite a lot of smudges. So instead of the runny paints i chose this paint which was much better and the color was nice a swell, a cyan sort of color. The paint on the side would shortly be pressed down to the other side. 




When i pressed down my ink using a tool called a squidgy, this was the print that was left over, i was very happy with the outcome there wasn't that many smudges and the edges were very slick and clean. Its a very simple print and it needs more advancing but it was my first time doing silk screen printing. The texture was very wrinkled due to the paper we used, we changed the type of paper after i had used this stencil, its something i need to take into consideration next time, choose the right kind of paper other wise it will be very wrinkled.



These pictures show the two most important tools i used when using this not forgetting the actual silk screen itself. The first picture is my 2D stencil without this i wouldn't of been able to print, im lucky i salvaged this because parts were ripping off due to me putting it down on the wrong side.








This is called a squeegee which was used to press down on the ink, we had to carefully choose the squeegee because depending on the size of the board, reflects on  the size of the squeegee. I chose the larger squeegee as it filled more of my board and the stencil, if it was smaller then it wouldn't have covered the whole of the stencil which would of left me with half of a print. This was a key tool in my silk screen printing task. Overall I really liked flat screen printing, I've developed my prints more by overlaying them with another coloured print, to be fair I prefer them slick back but it shows more development with them which are presented in my sketchbook.




No comments:

Post a Comment

Assemblage Piece 4 // Book Of Life //

 egfojwerngierngrenhgetrhnkgrengerjigoh

Search This Blog