Tuesday, 20 March 2018
Portraiture Sheet
As our portraiture project is only a small project we were asked to present out work on a sheet full of at least one artists that we were influenced by, all of our work so far and then annotation just to explain the things I liked about the work I've produced and what I could of done better. Drawing is probably my weakest type of art, as I haven't had that much experience with drawing this was quite new to me, I started off bu using tracing paper and creating some smaller drawings just to try out media, I like them but the facial features could be a lot more better and accurate. I tried out this coloured card which brings the drawing out more, again I need to practice more on the features mainly the nose getting it more curved rather than pointy. I the moved onto a more larger scale which was nice because it allowed me to be a lot more free while drawing along with the style of drawing which was this type of messy style so we could just be free and start making messy lines which makes the drawings look a lot more busy and If I was a going to follow up drawing as my final style I could use this type of drawing because I like to be more free and messy while drawing rather than restricting myself to this plain smooth style of drawing. My final drawing was inspired by the artists Jean Buffet, she also has this messy style to her work, there not very human like more abstract drawings which was what I liked about them, also I like her colour combination and how random it is, looking at here other piece of work which is more messy I used the influence of the dark colours she used for the background which just pushes the main drawing to the foreground. As I background I just made the sheet look messy so it links back to the style of drawing these pieces where inspired by.
Thursday, 21 December 2017
Final Piece
This is my final piece, a palm house inspired jelly fish sculpture. After testing out with different materials and shapes I finally chose mod rock to use with my final piece, I made a wired outline first just like the one I made with my tissue paper try out, I then used mod rock to cover all around the wire, it take a lot of packets of mod rock to make sure that it was completely covered and also to make it was sturdy. After that was finished I moved onto the colour choice of the sculpture, I wanted to base it off one of the flowers that was in the palm house which is shown in my sketchbook. So purple it was, after I had painted it, I was really satisfied with the outcome, it was a bit boring and not what I was hoping for, I added small strokes of dark blue going up and down the sculpture which I think really adds to the sculpture, using different shades of one colour really makes a difference. The one thing that I would change is the shape of it, parts of fine but other parts are very lobbed sided, which is due to the wire not being straight and there are little white holes coming through the paint which is down to how I've placed the mod rock, I was meant to smooth it out to get all the bubbles out but thats something I forgot to do and never realised until I painted it.
This is my sculpture in the dark, which is were it looks best I think, the camera quality is bad on this picture but in real life it looks a lot better, with the idea of me having fairy lights dangling, none of the light was coming through so I drilled holes into it to let the light out, which reflects the light shining through the glass in the Palm house. I just think this would be so nice hanging up int he palm house, with all the light shining through the holes would light up the building. Maybe if the lights were more powerful then it could give off more light allowing you see the actual shapes of what it is. This could also be aimed at those who don't have any vision, but they can see glimmers of bright lights and they could use their sense of touch to feel the texture of the sculpture to give them an idea of the feel of the palm house, I would of liked it more smoother but thats just what texture the material gave off. Im satisfied with my outcome and pleased with how it turned out.
This is my sculpture in the dark, which is were it looks best I think, the camera quality is bad on this picture but in real life it looks a lot better, with the idea of me having fairy lights dangling, none of the light was coming through so I drilled holes into it to let the light out, which reflects the light shining through the glass in the Palm house. I just think this would be so nice hanging up int he palm house, with all the light shining through the holes would light up the building. Maybe if the lights were more powerful then it could give off more light allowing you see the actual shapes of what it is. This could also be aimed at those who don't have any vision, but they can see glimmers of bright lights and they could use their sense of touch to feel the texture of the sculpture to give them an idea of the feel of the palm house, I would of liked it more smoother but thats just what texture the material gave off. Im satisfied with my outcome and pleased with how it turned out.
Maquettes towards final piece
This is the picture of what was left from trying to get it off the mould.
This is one of the materials that I used which is called mod rock, I found this really easy to use, you just dipped it into water and then stick to what ever your making. I followed this up by using this unique shape I found, the thing that I liked about this shape was the bottom with little swirls in it, like the other material I used clingfilm so it would be easier to get off and it worked, it didn't crack or break off, it was really easy to get off, it did look better with the actual object in it because when I took it off there was a lot of access mod rock left over which got rid of the swirls that I liked.
Printing on fabric
When using both flat screen printing and Lineo printing I wanted to try it out using different materials, I found this piece of fabric which was perfect for what I wanted to do. I used my stencil firstly with both cyan and black paint which gave off the effect of the whole fabric being covered in black but then I small print of the stencil. I then covered the board except from the stencil which allowed all the ink to pass through leaving a white print with a can coloured background. I prefer the cyan on black, I think the colours really work well together. Printing on fabric isn't that hard, I thought initially that it wouldn't have printed right but it did, its all about experimenting and using different materials shows how I've don't that.
This is me trying out lineo printing on fabric, I wanted to go for this kind of collaged mixture of prints, so I used different colours and overlapped them all on top of each other, I liked the outcome because a lot of it is covered but you could still make out parts of what it was. There are very harsh shapes, like the squares which is due to the shape of the lineo, again like the other print it was just about experimenting and thats what I've tried to show with this other type of printing.
This is me trying out lineo printing on fabric, I wanted to go for this kind of collaged mixture of prints, so I used different colours and overlapped them all on top of each other, I liked the outcome because a lot of it is covered but you could still make out parts of what it was. There are very harsh shapes, like the squares which is due to the shape of the lineo, again like the other print it was just about experimenting and thats what I've tried to show with this other type of printing.
Sunday, 3 December 2017
Coronation Street Trip
On Friday we were taken to the itv set in Manchester, to see the production of the soap coronation street and how it was made. It was nice to get outside the class and be more active, we started the day off by being introduced to Carolyn who would be showing us around the set, she took us to some of the indoor sets which was very interesting to see because I always thought the set would be outside were its filmed, we got to see the new set that was being made and the outside set. After that we were taken to the head of design who shown us all of his drawing of the set and he told us all the things he was in charge of like gathering pictures of different sets out there and then feeding that back to the people who create the story lines. It was nice to get a insight on how hard it is to get everything ready, and how much preparation actually goes into it. At the end of our day after taking more photos and walking round the set we were taken to the area where the sets are actually built, kind of like the dt accept of it, we got to see their designs and then we were taken down to were everything is actually made, it was intriguing to see how polished everything was down there and how many people it took to make all the sets. Overall it was a very interesting day out and it allowed me to know more in depth about how the come to make the sets.
Monday, 27 November 2017
Lino Print
Heres some of the tools I used when making our Lino relief prints, Im missing the blank of wood which was used to keep our Lino cut out in place incase we injured our selves, even though theres not. picture on here ill still mention about how it was used. First off I started out my cutting out my design which was a goat from the palm house, I decided to use this statue because its something I haven't used before in my other work. I gently scrapped out pieces of the cut out safely so I didn't swing off injuring someone or my self, next I put paint onto a board, I went for crimson red which looked nice so applying that I rolled onto my cutout which then led to imprinting on a piece of paper. I did multiple try out with just one colour and then I decided to go back to my cutout carve chunks out of it which left white spaces stopping any paint from getting in, after this I one track to the paint and decided on a different colour and then rolled that out onto it so with my first print it only had one colour and then I carved out his eyes so when I went back over the different colour would go everywhere but the spaces that I carved out. Overall I really enjoyed this type of print I think they're very quick and easy to make and they weren't that hard to do.
Saturday, 4 November 2017
Flat screen printing
These are the pictures from when we studied Flat screen printing, there were a few complicated steps to remember when actually creating our own. Before we started we had to create three 2D cutouts which would be our stencils so when pressing down whatever the stencil was that is what our prints would be, the three I made where two of a butterfly and one of a bunny. When cutting the 2d designs out some of them were a problem because there was to much detail and it would of all just fell apart so the ones I chose were rarely simple in the way they didn't have an overload of detail. After we had our 2D designs done we are all ready to start we placed an A2 sheet down and then our flat screen which we had to check when choosing one because some of them were clogged and when pressing,the paint wouldn't of gone through. After choosing a clean flat screen I placed it own on the paper and marked the edges with pencil so if it moved I know were I started from.
The next step was to place paint on one side of the silk screen, there was a bit of a problem with the choice of paint, some of them were really runny so if we put that down the print would have quite a lot of smudges. So instead of the runny paints i chose this paint which was much better and the color was nice a swell, a cyan sort of color. The paint on the side would shortly be pressed down to the other side.

When i pressed down my ink using a tool called a squidgy, this was the print that was left over, i was very happy with the outcome there wasn't that many smudges and the edges were very slick and clean. Its a very simple print and it needs more advancing but it was my first time doing silk screen printing. The texture was very wrinkled due to the paper we used, we changed the type of paper after i had used this stencil, its something i need to take into consideration next time, choose the right kind of paper other wise it will be very wrinkled.

These pictures show the two most important tools i used when using this not forgetting the actual silk screen itself. The first picture is my 2D stencil without this i wouldn't of been able to print, im lucky i salvaged this because parts were ripping off due to me putting it down on the wrong side.
This is called a squeegee which was used to press down on the ink, we had to carefully choose the squeegee because depending on the size of the board, reflects on the size of the squeegee. I chose the larger squeegee as it filled more of my board and the stencil, if it was smaller then it wouldn't have covered the whole of the stencil which would of left me with half of a print. This was a key tool in my silk screen printing task. Overall I really liked flat screen printing, I've developed my prints more by overlaying them with another coloured print, to be fair I prefer them slick back but it shows more development with them which are presented in my sketchbook.
The next step was to place paint on one side of the silk screen, there was a bit of a problem with the choice of paint, some of them were really runny so if we put that down the print would have quite a lot of smudges. So instead of the runny paints i chose this paint which was much better and the color was nice a swell, a cyan sort of color. The paint on the side would shortly be pressed down to the other side.
When i pressed down my ink using a tool called a squidgy, this was the print that was left over, i was very happy with the outcome there wasn't that many smudges and the edges were very slick and clean. Its a very simple print and it needs more advancing but it was my first time doing silk screen printing. The texture was very wrinkled due to the paper we used, we changed the type of paper after i had used this stencil, its something i need to take into consideration next time, choose the right kind of paper other wise it will be very wrinkled.
These pictures show the two most important tools i used when using this not forgetting the actual silk screen itself. The first picture is my 2D stencil without this i wouldn't of been able to print, im lucky i salvaged this because parts were ripping off due to me putting it down on the wrong side.
This is called a squeegee which was used to press down on the ink, we had to carefully choose the squeegee because depending on the size of the board, reflects on the size of the squeegee. I chose the larger squeegee as it filled more of my board and the stencil, if it was smaller then it wouldn't have covered the whole of the stencil which would of left me with half of a print. This was a key tool in my silk screen printing task. Overall I really liked flat screen printing, I've developed my prints more by overlaying them with another coloured print, to be fair I prefer them slick back but it shows more development with them which are presented in my sketchbook.
Subscribe to:
Posts (Atom)
Search This Blog
-
Following our next assignment we visited The Palm house in Sefton park, we were asked to capture the buildings architecture and make a few ...
-
To begin with my assemblage project I started by created a box inspired by energy and power, I used a fairy light box which was a perfec...
-
While studying the style impasto for out portraiture I chose the artist ......... to take inspiration from, the reason for me choosing h...